Design and price of tiles | টাইলস এর ডিজাইন ও দাম

The designs and prices of tiles are much more than we have here. Earlier, huge buildings were rarely seen. But today, these are increasing daily in front of our eyes. Earlier, these buildings were used for coating with ordinary cement, which is still seen in many places in dollars.

But the surprising thing is that today many people obsessively use different types of ties with distinct craftsmanship on their phones. Even in many buildings, these tiles can be found on the walls. And the use of tiles in the bathroom or kitchen is every day. Nowadays, many beautiful amulets are used in the bathroom as well.

what is the price of tiles - টাইলসের দাম নিয়ে আলোচনা 


Design and price of tiles | টাইলস এর ডিজাইন ও দাম

However, many people may not have any idea about the correct price for homesteading. Many of us might be tormented about the exact value of the dice while paying it. Again, many are deceived in this regard. But today, we will not have any doubts, and we will leave ours utterly free today. So let's know about the exact price.

So it is essential to know about our country before knowing the exact price. Because the truth is that there is no fixed price, the same price usually depends on different sizes. So let's take a look at the different sizes of the country.

size of the tiles - টাইলস এর সাইজ 


Size of floor tiles: 12" x12", 16" x16", 20" x20", 24" x24", 32" x32", 28" x28" etc.

Size of wall tiles: 8" x12", 10" x13", 10" x10", 12" x18", 12" x20", 12" x24", 12" x48" etc.

But you can take marble granite according to size; it has many advantages.

Price of tiles - টাইলস এর দাম


Tiles are priced per square foot. Approximately 96 to 130 to 144 square feet will cost around Rs 35 to Rs 70 per fish. And for giving medium sizes from 192 square feet to 256 square feet, the cost will be only 60 rupees to 100 rupees per fish. And large size tiles such as 288 square feet to 576 square feet will cost roughly from 85 to 130, 150, or 160 rupees. I hope you have a rough idea about the ties, so without delay, know the right price, and you can make a beautiful circuit building.

Design of tiles - টাইলস এর ডিজাইন 


The living room is one of the most frequented spaces in a house, and using tiles on walls can help create a focal point. You have unlimited options for luxury marble tiles, mujahid tiles, wooden chair porcelain tiles, or simple designs with geometric patterns.

Design of floor tiles - ফ্লোর টাইলস এর ডিজাইন


Terracotta floors or walls can therefore be added to the school living room so that the place has an old and rustic look. Natural stone tiles, with their superior strength and elegance, can be used to enhance the beauty of the living-dining room.


Carpet can be used on the living room floor where patterns wood folk tiles bass design. And there are a variety of patterns, from safe tones to happiness. Moreover, there are various materials that you can choose from, such as marble, ceramic, stone, porcelain, porcelain, granite, quartzite, etc.

Design and price of tie - টাইছের ডিজাইন ও দাম



Type Type =============== Cost Range

Marble tiles ============== Rs.30 to Rs.250 per sq.ft.

Porcelain Tiles ============ Rs 25 to 180 per sqft.

BD Price Tice ============ Rs.1 to Rs.200 per sqft.

Neutral: Neutral colors such as white, gray, or black are trending in interior design and are used to create backgrounds. It can also be used to highlight and create refined layouts.


Earth colors: Brown and green colors indicate nature and stability. They make for good background colors.


Cool colors include green, purple, and blue, which you can use to bring a calm and refreshing look to your interior.


Warm Colors: Warm colors include red, yellow, and orange, perfect for achieving a vibrant and sophisticated look.

Complementary colors include contrasting colors like orange and blue or purple and yellow, which work best as accent colors.

We now use many types of tiles, such as:-

1. Floor and Wall Tiles

2. Rustic tiles

3. Pavement tiles

5. Ceramic tiles

4. CT-5 tiles or Birk

Floor tiles of different sizes are available in the market.


12"x12", 16"x16", 20"x20"

24"x24",32"x32",24"x48" etc

Wall 8"x12", 10"x13", 10"x16", 12"x18",

12"x20", 12"x24", 12"x48" also available in many types of china wall tiles.

Things we check before installing tiles:


1. Sanitary lines are appropriately installed, and pacemakers are checked.

2. Whether the electric lines are adequately done,

3. When flooring the bathroom, the water slope should be along the wastewater line.

4. Tiles should be seen to match the joints of the tiles.

5. The Floor should be cleaned by chipping well before installing the general Floor. Once it is clean, cement should be mixed.

6. this telephone is routed through its 0.50" PVC pipe before laying on the general Floor.

7. To flush the sliding wall, the wall must be cut first.

8. If the escalating wall is flush, the escalating should be covered.

9. When installing bathroom wall tiles, the bottom tiles should be placed on top of the bathroom floor tiles

10. If you put a border on the bathroom wall, the border should be placed on the basin and below the glass shelf so that the fence can be seen when you enter the bathroom.

11. If you put decor on the bathroom wall, you can give four walls; it is like everyone's mind.

12. etc. Besides, many things have to be looked at while working. Now the calculation of the tiles we generally calculate as mentioned below.


Stair trade

The riser of the stairs

Landing Skating

Lobby elevator

Font tiles

Bathroom wall

Bathroom floor

kitchen wall

Kitchen floor

General Floor

Escutcheon 4" or 6."

Now for the masala wall of tiles, we keep a 1" thickness masala with a wall masala ratio (1:2).

We keep a 1.5" thickness masala on the Floor with a balance of masala to the bottom (1:3).


* 1500 square feet of wall tiles will be taken out 



Amount of wet plaster masala

= 1500x(1"÷12)

= 125 cubic feet

Amount of dry masala = 125x1.5

= 187.50

Sum of ratios = (1+2)=3

goods

Cement = (187.50x1÷3)x0.8

= 50.00 bags

Sand = (187.50x2÷3)

= 125.00 cubic feet

We charge 10% Wagestage on Wall Tiles

Then the number of tiles

= 1500x1.10

= 1650 sq.ft

2500 square feet of floor tiles stock

I will find out

Amount of wet plaster masala

= 2500x(1.5"÷12)

= 312.50 cubic feet

Amount of dry spices = 312.50x1.5

= 468.75

Sum of ratios = (1+3)=4

goods

Cement = (468.75x1÷4)x0.8

= 93.75 bags

Bali = (468.75x3÷4)

= 351.56 cubic feet

We charge 8% wedge stage on floor tiles

Then the number of tiles

= 2500x1.08

= 2700 sq.ft


Now the pointing of the tiles



Pointing is filling the joints of tiles and connecting two tiles. HOW TO DO IT After finishing the laying of tiles, after curing, the joint is thoroughly cleaned with white cement, and the tiles are painted with color paint. Other pointing materials other than white cement are available in the market. It is also done with

Pointing goods 


Someone asked how many 12 "x12" pitch tiles would be needed for a 1200-square-foot space.


Answer: 1200 square feet of tiles are to be installed then. The total amount is 1296 with 8% wastage.

Area of ​​one tile if square feet tiles measure 12 "x12".

(12"x12")÷144 = 1 square foot

So number of tiles = 1296÷1 = 1296 pitch tiles

Tiles are a finishing item in civil works.

We use many types of tiles now

For example:-1. Floor and Wall Tiles

2. Rustic tiles

3. Pavement tiles

5. Ceramic tiles

4. CT-5 tiles or tiles of different sizes are available in the market for floor 12"x12, 16"x16", 20"x20", 24"x24",

32"x32",24"x48" etc

Wall 8"x12", 10"x13", 10"x16", 12"x18", 12"x20", 12"x24", 12"x48"

Besides, there are many types of wall tiles available in China. We check all the things before installing the tiles.

1. Sanitary lines are appropriately installed, and pacemakers are checked.

2. Whether the electric line is done correctly, 3. The water slope should be along the wastewater line when flooring the bathroom.

4. Tiles should be seen to match the joints of the tiles.

5. Before installing the general Floor, the Floor should be cleaned by chipping well; once it is clean, cement should be mixed.

6. Dis telephone should be given through its 0.50" PVC pipe before laying the general Floor. 7. To flush the escutcheon wall, the wall should be cut first.

8. If the escalating wall is flush, the escalating should be covered.

9. When installing bathroom wall tiles, the bottom tiles should be placed on top of the bathroom floor tiles

10. If you put a border on the bathroom wall, the border should be placed over the basin and below the glass shelf so that the frame can be seen ultimately when entering the bathroom.

11. If you put decor on the bathroom wall, you can give four walls; it is like everyone's mind.

12. etc. In addition, many things have to be looked at while working. This time, we usually calculate the tiles as mentioned below.

Stair treads Stair riser landings.

SKATINGLOBLIFT FONT TILESBATH ROOM WALL BATHROOM FLOOR KITCHEN ROOM WALL KITCHEN ROOM FLOOR GENERAL FLOOR SKATING 4" OR 6" 4" OR 6" FOR TILES WE KEEP 1" THICKNESS WALL SKILL RATIO (1:2) ON FLOOR WE KEEP 1.5" THICKNESS SKILL FLOOR SKILL RATIO (1:3) ) 1500 sqft

Corobplaster of wall tiles goods

Amount of wet masala = 1500x(1"÷12)=

Amount of cubic feet of dry masala = 125x1.5 = 187.50 Sum of ratio = (1+2)=3 Malamalcement = (187.50x1÷3)x0.8 = 50.00 Bag sand = (187.50x2÷3)= 125.00

We charge a 10% wedge stage on cubic footwall tiles

Then the amount of tiles = 1500x1.10 = 1650 square feet

Two thousand five hundred square feet of floor tiles, cargo of corroborating wet plaster masala =

2500x(1.5"÷12) = 312.50

Amount of cubic feet of dry masala = 312.50x1.5= 468.75 Sum of ratio = (1+3)=4 Malamalcement = (468.75x1÷4)x0.8= 93.75 Bag sand = (468.75x3÷4)= 351.56

If we take the 8% wedge stage in cubic feet of floor tiles, then the size of tiles = 2500x1.08 = 2700 square feet. Now, the pointing of the tiles is to fill the joint of the tiles and join the two tiles together. How to install the tiles. Today we will talk about tiles. Tiles are a finishing item in civil works. Many tiles are used, such as:-1: Floor and Wall Tiles2. Rustic Tiles3. Pavement tiles5. Ceramic tiles4. CT-5 tiles or different size tiles are available in the market like Floor 12"x12, 16"x16", 20"x20", 24"x24", 32"x32", 24"x48" etc. Wall 8"x12", 10"x13", 10"x16", 12"x18", 12"x20", 12"x24", 12"x48" There are also many types of wall tiles available in China. All the things we check before installing tiles


1. Sanitary lines are appropriately installed, and pacemakers are checked.


2. Whether the electric lines are adequately done,


3. When flooring the bathroom, the water slope should be along the wastewater line.


4. Tiles should be seen to match the joints of the tiles.


5. The Floor should be cleaned by chipping well before installing the general Floor. Once it is clean, cement should be mixed.


6. Dis telephone should be routed through 0.50" PVC pipe before the general Floor's installation.


7. To flush the sliding wall, the wall must be cut first.


8. If the escalating wall is flush, the escalating should be covered.


9. When installing bathroom wall tiles, the bottom tiles should be placed on top of the bathroom floor tiles


10. If you put a border on the bathroom wall, the frame should be placed over the basin and below the glass shelf so that the edge can be seen when entering the bathroom.


11. If you put decor on the bathroom wall, you can give four walls; it is like everyone's mind.


12. etc. Besides, many things have to be looked at while working.


Now count the tiles: 



We usually calculate as below mentioned.

SKATINGLOBLIFT FONT TILESBATH ROOM WALLBATH ROOM FLOOR KITCHEN ROOM WALL KITCHEN ROOM FLOOR GENERAL FLOOR SKATING 4" OR 6" OR 4" OR 6" WALL TILES WE STAY 1" THICK.

Wall Masala Ratio (1:2) Floor We 1.5."

1500 Sq.Ft.

Amount of dry mortar in cubic feet = 125x1.5 = 187.50Sum of ratio = (1+2)=3 Malamalcement = (187.50x1÷3)x0.8= 50.00 Bag sand = (187.50x2÷3)= 125.00 cubic feet in wall tiles If we take 10% wedge stage then quantity of tiles = 1500x1.10 = 1650 sq. ft. 2500 sq.ft. = (1+3)=4 Malamalcement = (468.75x1÷4)x0.8= 93.75 Bag sand = (468.75x3÷4)= 351.56

If we take the 8% wedge stage in cubic feet of floor tiles, then the size of tiles = 2500x1.08 = 2700 square feet. Now, the pointing of the tiles is to fill the joint of the tiles and join the two tiles. Other than white cement, other pointing materials are available in the market.

It is done with that.

After curing, the joints are thoroughly cleaned with white cement, and the tiles are painted with color. Other than white cement, other pointing materials are available in the market.

So the total amount is 108 sqft with 8% wastage.

If the size of the tiles is 12"x12", the area of ​​one tile is (12"x12")÷144 = 1 square foot.

Hence the number of tiles

= 108÷1

= 108 pitches

If the size of the tiles is 16 "x16".

Area of ​​a tile

= (16"x16")÷144

= 1.7778 square feet

Hence the number of tiles

= 108÷1.7778

= 60.75 pitch

~ 61 pitches

If the size of the tiles is 20 "x20".

Area of ​​a tile

= (20"x20")÷144

= 2.7778 square feet

Hence the number of tiles

= 108÷2.7778

= 38.88 pitch

~ 39 pitches

Rules for finding the number of tiles:


To determine the number of tiles, first, you need to know the size of the tiles. There are many different sizes of tiles available in the current market. If you know the source, you can find the number of tiles of all sizes. If we think 100 sq. ft. of tiles are to be laid then the total amount with 8% wastage is 108 sq. ft. Tiles of size 12"x12" Area of ​​one tile (12"x12") ÷ 144 = 1 sq. ft. So number of tiles = 108 ÷ 1 = 108 pitch tiles Area of ​​one tile if size 16"x16" = (16"x16") ÷ 144 = 1.7778 square feet So number of tiles = 108÷1.7778 = 60.75 pitch ~ 61 pitch Area of ​​one tile if size 20"x20" = (20"x20")÷144 = 2.7778 square feet so number of tiles = 108÷2.7778 = 38.88 pitches ~ 39 pitches


I hope you enjoyed reading the post. And we hope you got what you wanted to read. Always visit our website to get all such information. Thanks for being on our side.


blog post blog post blog post blog post blog post blog post
Next Post Previous Post